“Here” by Philip Larkin Essay

Write a close critical analysis of ‘Here’ showing how far this is characteristic of the style and concerns of Larkin’s collection ‘The Whitsun Weddings’ ‘Here’ is a poem exploring Larkin’s flight of imagination as he travels from London to Hull on the train. It is the first poem in The Whitsun Weddings collection and seems to be an appropriate introduction because, much like his other poetry, it looks at humanity’s place in the world and the effect of consumerism. Following the pattern of many other poems in this collection, ‘Here’ begins with physical ideas of ‘rich industrial images’, before becoming more abstract in the final stanza. By beginning the poem with the participle, ‘swerving’, Larkin immediately gives the reader a sense of the moment being suspended in the present, before an unpredictable, fast movement, which is not usually associated with travelling on a train. The word itself is sudden, describing an immediate action and repetition of this throughout the first stanza emphasises this sensation, creating a feeling of Larkin’s thoughts being free and unrestrained. The beauty of this movement is then contrasted by the sharp sounds of the ‘thin and thistled’ fields, bringing attention to the change in surroundings, from the town to the countryside. By listing what he sees from the window of the train – ‘scarecrows, haystacks, hares and pheasants’ – Larkin constructs a series of moving rural images that contrast to the earlier industrial descriptions of ‘workmen at dawn’. The sibilance on ‘haystacks, hares’ increases the rhythm of the poem and represents the movement of the journey of the train. As well as this, the constant and repetitive use of ‘and’ in this stanza creates a feeling of the images continuing forever, without stopping. This is further emphasised by the fact that the poem is all one sentence that is not end-stopped until the final stanza, resulting in the feeling of building tension and pressure. In the last two lines, Larkin further explores the beauty of the countryside. He creates a sense of the fields opening up with ‘the widening river’ and its ‘slow presence’ along with the ‘piled gold clouds’, gives a feeling of dignity and a suggestion of heaven, while the lengthened assonance slows the  pace of the meter, further adding to this peaceful atmosphere. Larkin’s transition from the rural area shown in stanza one, to images of urban activity in stanza two come as a shock. The ‘domes and statues, spires and cranes’ creates a sense of bustle and closeness in the town, which contrasts to the beauty of the ‘shining gull-marked mud’ previously described. The word ‘cluster’ is welcoming, giving the sense of intimacy and an impression of everything being pulled together in a rich concentration. This idea is taken further with the introduction of ‘grain-scattered streets’ where there is a feeling of abundance. However, Larkin quickly explodes this sensation with the introduction of more contemporary buildings with ‘plate-glass swing doors’, creating the feeling that the town is modernising and on the axis of change. At this point we start to see parallels with other poems in The Whitsun Weddings. In both ‘The Whitsun Weddings’ and in ‘Sunny Prestatynâ €™, for example, he condemns the nature of commercialisation. â€Å"Parodies of fashion† and â€Å"nylon gloves and jewellery substitutes†, from ‘The Whitsun Weddings’, criticises the nature of consumerism and parallels Larkin’s words in ‘Here’. We get the impression that Larkin does not like the advancement and change occurring in the town. The phrase ‘flat faced trolleys’ seems blunt and unappealing, while ‘raw estates’ suggests something unfinished, without polish and out of place. By listing products, Larkin implies that consumerism is addictive; ‘cheap suits, red kitchen-ware, sharp shoes, iced lollies, electric mixers, toasters, washers, driers-‘, creates a sense of the products building up. By using commas, instead of ‘and’, Larkin enhances the meter of the poem to give a staccato effect and a build in tension. He does this to emphasise the consumer’s obsession with material goods and enhances this affect by shortening the length of s yllables in each word as the list progresses. Reflecting his ideas in ‘The Whitsun Weddings’ – where he describes the reverse journey to ‘Here’, travelling fro London to Hull – Larkin further denounces consumerism with the callous words in stanza three, ‘a cut-price crowd, urban yet simple’. This relatively dismissive tone relates back to the earlier images of ‘raw estates’ giving the impression that the people living in these urban areas are not sophisticated. The phrase ‘cut-price  crowd’ is made up of hard, harsh sounds, but this is contrasted by the following words, ‘yet simple’, which has an affectionate tone for the uncomplicated people. Following this, the word ‘dwelling’ appears comfy and suggests affection for the inhabitants, which reminds us of the warmth Larkin shows towards the earl and countess, in ‘Arundel Tomb’. We get a sense of the town spreading out and growing with the ‘mortgaged half-build edges’ and the ‘isolate villages’, showing that consumerism is engulfing the entire area. This is taken further with the words ‘where removed lives/loneliness clarifies’ which is split across the two stanzas and finally end-stops the 27 line sentence. Through this separation, Larkin uses enjambment to draw our attention to each word, therefore, showing the shift of perspective and pace. The word ‘clarifies’ strips away any confusion or doubts, demonstrating how unblemished the rural areas are. By containing the first three stanzas within one sentence, Larkin creates a sensation of the reader travelling with him on the train. This long sentence juxtaposes the sudden short, monosyllabic sentence in the final stanza – ‘here silence stands like heat’. The long vowel sounds in this sentence create a sense of peace and freedom. This contrast in sentence length is symbolic of the journey, which is enhanced by the use of iambic pentameter throughout the poem. For the first three stanzas, the pentameter is flawless, adding to the sense of constant and rhythmic movement. However, in the last stanza, it is more erratic, lines like â€Å"luminously peopled air ascends† fall a few syllables short of the constant rhythm throughout the rest of the poem, showing that Larkin is a little unsettled. The final stanza gives the reader a shift in tone, from fast paced, to slow and reflective, through twists of syntax. This reminds us of the final sentences in â€Å"Mr Bleaney† – ‘should make him pretty sure he warranted no better’ where the tone is also changed suddenly. In this stanza, the poem becomes more abstract and repetition of ‘here’ slows the rhythm down, giving significance to the moment. ‘Luminously-peopled air’ is mysterious and suggestive, taking us away from the brilliantly captured images earlier in the poem towards a vague and suggestive tone. Alongside this, use of words such as ‘unnoticed’, ‘hidden’ and ‘neglected’ stresses the absence of people  and creates a sense of nature being unwatched. ‘Hidden weeds’ gives the impression that they are private, which contrasts to the earlier images of busy consumerism. The final line is particularly poignant, ‘here is unfenced existence’, stating Larkin’s main message that even when we die, nature will still be there. Similar to in ‘Dockery and Son’, Larkin suggests his terror of death and feeling of dread at descending into oblivion when life ends. ‘Here’, reflects Larkin’s main message throughout The Whitsun Weddings of disenchantment with industrial advancement and the age of consumerism. By using long sentences and enjambment throughout the poem, Larkin creates a sense of building tension and alongside this, much like his other poems in this collection, ‘Here’ moves from physical ideas to the abstract. This results in an overall message echoing his views towards life and society.

Modelling a Frame Subjected to Multiple Loading Conditions Essay

In this experiment the main aim was to modelling a frame subjected to multiple loading conditions and record how the force and strain vary to different loads. The frame represented a simple roof trusses and the loading conditions are similar to what a typical roof would undergo. In this experiment a universal fame was used with load cells to provide the load and digital force and strain instruments to record the data. As the load was increased the strain went up linear showing a linear relationship between loading and strain. After analysing results it was found that the results for experimental forces compared to theoretical forces were very close showing that this experiment was very accurate, with very small uncertainty, the reason for this is due to very sensitive equipment as a change of 1 µ? is equivalent to change of 6 N (using young’s modulus) and other factors described in detail in the report. Table of Contents Summary 1 Introduction Pg 4 2 Theory Pg. 4 3. 1 Apparatus Pg 6 3. 2 Experimental procedures Pg 8 4 Observation and results Pg 8 4. 1 Results Pg8 4. 2 Observations Pg11 4. 3 Discussion Pg11 4. 4 Sources of error Pg11 5 Conclusions Pg12 References Pg13 Appendices Pg13 Introduction The aim of this laboratory was to carry out an experiment to measure the strain in members of a frame, where load was being applied in different loading conditions. This experiment was carried out to put to use the theory learnt in lectures and see how they actually perform in a real life model. By doing this it is possible to appreciate the limit of theoretical approach to these loading conditions and compare the errors. The model used in the experiment was that of an idealised roof truss, a roof must withstand a lot of force over a long time during its lifetime. Three 3 different loading scenarios will be modelled and the strain forces are expected to be within the range of the calculated theoretical forces. Main aims were: 1. Measure the strain in each member and record results 2. Calculate theoretical values for the experiment 3. Compare theoretical values with experimental results and calculate percentage error Theory In a frame model where there is a load being applied members of the frame will feel a compressive or tensional force. The value of the force can be worked out by resolving the forces in horizontal and vertical directions and taking moments. This is done by analysing each of the joints of Fig 1 separately. In a rigid static frame the sum of the vector forces add up to zero Fig 1 model of experiment The first loading model has is simulated with a load of 500N. First work out the value for the reaction force at the supports. Then use these values to calculate the tension in each member of the truss. Hand written theory in appendix (1) Apparatus The apparatus used in this experiment are by Tecquipment STR8 Pin-jointed Frameworks Digital force display -500N to 500 N Digital strain display- 1Ãâ€"10-9 ? Load cell – 0-500N range Screwdriver Experimental procedures Test 1 1. Calibrate the load reading instruments to measure zero on channel 1 on the digital load display, if the display shows load being applied then adjust the appropriate load cell W1 by rotating the appropriate knob. Test 2 1. Carefully remove the pin that is holding load W1 and reinstate load W2 2. When no load is being applied to the members check the digital strain display, there are 13 channels one for each gauge. Each gauge must be reading zero if not use adjust the reading to read zero as close by using a small screw driver. 3. Make sure the load cell W2 does not interfere with the frame. 4. In table 1 record the strain values of each member from the digital strain display. 5. Next apply a load of 100N to the load cell W1 by turning the handle anti clockwise then read the digital strain display for channels 1 to13 and record in the table. 6. Repeat steps 5 for loads 200N, 300N, 400N and 500N 7. After recording all values reduce the load to zero by rotating clockwise. 8. Using the values of strain for 500N load calculate their equivalent member forces and record them in table 3 using the following equations : Test 3 1. For this model both load cells must be loaded on to the frame 2. In table record the strain values of each member from the digital strain display when no load is being applied 3. Next apply a load of 500N to the load cell W1 by turning the handle anti clockwise then read the digital strain display for channels 1 to13 and record in the table. 4. Switching to channel 2 on the digital force display apply a load of 100N then read the digital strain display for channels 1 to13 and record in the table 5. Repeat steps 4 for loads 200N, 300N, 400N and 500N on load cell W2 6. After recording all values reduce the load to zero by rotating clockwise. 7. Using the values of strain for 500N load calculate their equivalent member forces How to use the strain to convert into force is described in the appendix (2) 4. Results and observations 4. 1 Results CENTRAL LOADING Angled loading Multiple loading The sum of experimental forces for loading of 500 N in loading 1 and 2 4. 2 Observation Allow the equipment to stabilise by waiting 5 minutes in order to eliminate and uncertainty due to heat affecting resistance values. There are no significant health and safety risks in this experiment. 4. 3Discussion A way in which to improve the results of the experiment would be to take repeat readings of the strain for each gauge at least three times in order to eliminate any anomalous results. Another addition would be having different loading conditions on the frame and see how they affect the two gauges EF and IJ as they experience any strain which could lead to the question are these members required and do they make any difference. In loading condition 3 by having 2 load cells you create a model where there are members which are superimposed. When analysing table 8 and looking at the sum of the experimental values are larger than the theoretical value, when looking at member AH the values are notably are different when superimposed. 4. 4 sources of error The main sources of uncertainty will come from the calibration of the device as the digital strain reading instrument has an accuracy of  ± 0. 5Ãâ€"10-10 ? and the digital force display has an accuracy of 0. 5 N. These are very small values; it is difficult to zero the strain display which lead to a poor accuracy. The strain values is calculated by the change in resistance of the wire when it is under tension or compression, however change in temperature would affect the length of the wire therefore giving a different value of resistance leading to inaccurate strain reading. 5. Conclusion After analysing the results in detail it is shown that the difference in theoretical and experimental results is not significantly different and therefore using the theory of resolving forces it is possible to gain an accurate value of true member forces and equally important to simulate and model the situation in real life scenario to gain a true understanding of what is going on. Also analysing table 3 shows that is also possible to calculate the force on a complex load by adding the forces individually. References Mechanics structures and thermo dynamics –university of Warwick Mechanics lectures by Dr. T. Karavasilis http://www. tecquipment. com/Datasheets/STR8_0213. pdf 29/12/2013 Appendices Pin jointed lab briefing sheets Theory (1. ) (2). Stress strain thoery

Appraisal Theory The Effects On Skin Psychology Essay

Appraisal Theory The Effects On Skin Psychology Essay This report aims to replicate a classic finding in biopsychology research which proposed, that increases in task difficulty lead to increases in arousal. As well as to present any individual differences that angle off from this, that possibly could be accounted by the appraisal theory. One hundred and two individuals took part in a task called Speedy Pizzas where they had to deliver successfully a vast quantity of pizzas as the level of difficulty increased. The individuals were represented with a total of 5 levels of difficulty, beginning from level 1 (10 pizzas per minute) to level 5 (50 pizzas per minute). This experiment used a repeated measures design where each individual participated at both levels of task difficulty. The outcome showed that there was a significant increase in GSR as task engagement got more challenging. Although, that the overall GSR test showed increase, individual differences might suggest otherwise. Introduction To begin with, this paper will first examin e some relevant background on the former literature on a classic biopsychology discoveries based on task performance and its association with increase in skin conductance in an attempt to replicate its findings. Afterwards, it will address some individual variations that might have a crucial role in that correlation. A number of researchers over the years have shown that task attainment of individuals is closely knit together with increase in skin conductance. For instance, Kahneman, Trusky et al. (1969 cited in Pecchinenda and Smith 1996) experiment, showed the relationship between skin resistance levels and mental arithmetic task at three layers of difficulty and encountered that skin resistance decreased as difficulty of each level increased. Nonetheless, this connection between them is often distinct, there are cases that the individuals disengage from the task by resigning which is shown in the form of decreasing responses in the GSR levels whilst the task engagement becomes pa rticularly difficult. This occurrence can be placed under the theory of the appraisal model proposed by Smith and Lazarus (1993 cited in Pecchinenda and Smith 1996) that suggested that the amount of each individual’s focusing resources is established by their appraisal of task-solving coping potential. The above theory has been adapted in various studies, one of them was measuring accomplishment in a demanding mental task. (Pecchinenda and Smith 1996) Pecchinenda and Smith’s study wanted to demonstrate the direct association between a cognitive task engagement and the appraisal of each individuals coping potential. Thus, subjects were presented by series of anagrams, that they were called to solve, in various circumstances whilst their GSR was continuously observed. The level of difficulty diverse between each anagram by either having an easy, moderately difficult and extremely difficult anagram as well as the amount of time available that participants had to solve it changed between 30 sec and 120 sec. Results showed that participants coping potential varied between them, since the perception that each subject experienced the situation was different. Paradigm, when an individual appraised their task-solving ability with having a high coping potential approached the task with the attempt to achieve their goal and successfully complete the task. On the contrary, people who appraised the situation as overwhelming and the â€Å"task as virtually impossible† (Pecchinenda and Smith, page 486) had low coping potential and therefore disengaged from the task. Hence, apposite to the skin conductance activity there was a general increase in the GSR levels when the task-solving trials were aligned with the participants’ engagement in the trials. However, this increase dropped dramatically when the anagrams level of difficulty was extremely demanding as a result of the paltry levels of task engagement. An interesting feature about this study th at shouldn’t be obscured was that the correlation between skin conductance activity and task engagement is not absolute. There are other aspects that might intrude and mislead this association. As in that the correlation between GSR and other components such as stress, perception of the circumstance, negative feelings etc resulted as having an impact on the GSR, Nikula (1991 cited in Pecchinenda and Smith 1996). Another related experiment was conducted by Bohlin (1976). Bohlin’s study manipulated the levels of arousal by having participants to response after a number of trials whilst they were in physiological habituation state. She divided the subjects into three groups, the first group were told to relax when listening to a tone, the second one were given arithmetic tasks to solve and the third one a threat of shock was added to the task performance. Results showed that the Shock-threat group had the highest mean in conductance level and the Relax group had the lowes t mean in GSR. Thus, this produces some evidence showing how  increases in task difficulty result in various increases in physiological arousal.

Internal controls and weaknesses report Essay Example | Topics and Well Written Essays - 1250 words

Internal controls and weaknesses report - Essay Example The paper "Internal controls and weaknesses report" aims to analyze purchase and payment and the receipt and sales functions of a business enterprise. Audit and assurance are important accounting functions which seek to check the completeness of financial records. These two functions are mandatory for businesses that operate as public limited companies. However, other business establishments, including sole proprietorship, can opt to conduct an audit of their business processes so as to ensure that their businesses are operating optimally. This voluntary action will go a long way in ensuring that the interest of the owner of the business is safeguarded. The purchase and sales functions of this business happens to have some weaknesses which can be remedied by the implementation of the recommendations that have been tabulated. The purchase and the sales function of a business are very important to a business. These functions ensure that the assets of the business are well taken care of . It is very important to ensure that these functions are operating optimally to ensure that the business operations run smoothly. Audit and assurance is the business function that maintains control on this processes. This function ensures that the correct books have been kept and the right transactions have been recorded. It also ensures that proper authority has been obtained for any business transaction to occur. An accounts payable clerk (AP) and purchasing officer (PO) are employed in addition.

Overpopulation and Its Effects Essay Example | Topics and Well Written Essays - 1000 words

Overpopulation and Its Effects - Essay Example Death rate is the prime regulator of the growth rate in a country. Death rate is controlled by a number of factors that include but are not limited to the quality of health care, awareness of health and safety in the society, availability of healthy diet and general style of living of the people. The Japanese population underwent a rapid growth during the 18th and 20th century, which can be attributed to the measures taken by the government to combat epidemics, the situation of law and order implemented by the central government which prevented the continuation of conflicts among the various states in Java, and the food policy which maintained an adequate supply of food to the nation during famines. There occurred an epidemic of Variola in Java during the 18th and 19th centuries. â€Å"Since 1856 there had been a systematic method under the supervision of the medical inspector to prevent further variola epidemics† (Timmer). Accordingly, the spread of disease was controlled. Th ere has occurred a general improvement in the quality of health care all over the world in general and the technologically advanced countries in particular. Alongside, birth rate has increased which controls the growth of population at the other end of the continuum. Birth rate is controlled by a number of factors including the increase of influx of foreigners to fill the skill gaps in countries with low growth rate of the local population, and religion. There are several religions including Islam which encourage people to have more children. Also, governments of several countries around the world have started to take measures to increase population so that the shortage of skills can be eradicated, which emerged in countries with low population. Hence, the two-way effect of decline in death rate and increase in birth rate is the main cause of growth of population. Early marriage is one of the most important causes of overpopulation. Again, religion is the prime motivational source f or the people to marry early as most religions condemn the acts of fornication and appreciate marriage. The practice of early marriage is also an outcome of the modernization of the society. As the society has become more modern and the factors provoking sexual desire are omnipresent, people have started to marry their children earlier than they did before so that the children can have a legitimate means of satisfying their physical needs in the society. Advanced societies around the world have conventionally suffered a lot from the increase of teen pregnancies. Teen pregnancies not only put the pregnant girls and their families in distress, but also the future of the children born from such pregnancies is insecure. Single parents tend to be more irresponsible towards their children. On the contrary, the responsibility of the up-bringing and nurturing of a child born to a married couple is shared by both husband and wife. Therefore, there has been an increase in the emphasis upon th e importance of marriage. Accordingly, early marriages have increased in number. This means that young couples feel more secure in marriage and their tendency to have more children increases. Illegal immigration is an external factor that increases the population of specially the advanced countries. Hundreds of thousands of illegal immigrants enter

Managing People for a Competitive Advantage class Research Paper

Managing People for a Competitive Advantage class - Research Paper Example The affirmative action programs are the only one hopeful way that can be used to deal with racial segregation. According to David L. Chappell, elimination of the programs in the name of their ineffectiveness would just worsen the situation instead of resolving it. This mainly owes to the fact that, a long period of time would take before other effective programs can be formed. Thus, it would be better and more time effective to try to fix the loose ends of the current programs instead of eliminating them completely (Chappell, 3). The affirmative action programs are also still necessary due to the fact that discrimination and inequality are issues that need experience and expertise in order to be countered. Evidently, the affirmative action programs are fully equipped with these two qualities and thus, they can be very helpful in eliminating cases such as preferential treatment. With the issue of preferential treatment being very rampant in the United States, it is only the affirmative action programs that can help since they already have set procedures of solving such issues (Chappell, 4). Despite other people alleging that this action by the affirmative programs would lead to reverse discrimination, in my opinion, this would not happen since the program can come up with measures that just uphold equality without having negative impacts on any race. One other reason that supports the fact that affirmative action programs are still necessary is that; other countries such as India are also using the same programs to curtail inequality and discrimination among their citizens (Chappell, 5). The United States should therefore look out for the weaknesses of its program instead of doing away with it completely. Other countries such as Malaysia have also proved that indeed affirmative programs have positive results if well implemented. In conclusion, I strongly support the fact that affirmative action should still be

Food Safety Requirements Essay Example | Topics and Well Written Essays - 750 words

Food Safety Requirements - Essay Example Organizations used to implement wrong storage practices that would often lead to the food ingredients spoiling while under production but to meet their profit obligations they will go on to introduce the harmful products into the market. Based on statistics from CDC, approximately forty-eight million people fall sick in the United States of America alone from foodborne diseases. Out of the forty-eight million people, one hundred and twenty-eight thousand die annually due to foodborne diseases that are majorly caused by food contamination. With the new rules, FDA can take action before the products are introduced into the market thus saving numerous lives that would have been endangered by harmful food substances. Ideally, the food industry is one of the most delicate sectors that require strict regulation since it directly impacts on the health and well-being of the consumers. Safety was always the driving force that guided the industry but with increased competition and advancement in technology, companies are now aiming at maximizing their profits at the expense of the well-being of the consumers. The law comes at an opportune moment when the world is gaping with the issue of Genetically Modified Organisms. The debate on GMOs has been on-going for a considerable period and still, there are not substantive steps that have been made to regulate the use and safety of these products. Typically, the American market is the one that is infiltrated with the largest percentage of GMO products in the entire universe.

Running Head Essay Example | Topics and Well Written Essays - 2500 words

Running Head - Essay Example Additionally, the article provides verification of the usefulness of self-management interferences and puts forward a feasible system, self-effectiveness, by which these intercessions function (Lorig & Holman, p. 1-2, 2003). Towards the end, the article talks about setbacks as well as solutions for combining self-management culture into the typical operational systems. Article 2: A Stitch in Time: Self-Regulation and Proactive Coping. Within a theoretical and chronological outline, obtained from study on public cognition, communal dealings, as well as nervous tension and dealing with it, the writers analyze the procedures by which individuals expect or notice possible stressors as well as act beforehand to stop them or to cancel out their force. The outline identifies 5 phases in practical coping: (1) reserve gathering, (2) acknowledgment of possible stressors, (3) preliminary evaluation, (4) introductory managing attempts, and (5) elicitation in addition to utilization of opinion wi th reference to primary attempts. The writers explain the part of personal divergences, expertise, and capital on every phase. They draw attention towards the exclusive forecasts afforded by a concentration on practical management as well as the significance of considering how individuals stay away from as well as compensate possible stressors. Individuals are variously recommended to be on familiar terms with indications signifying that problem is forthcoming and to do something to anticipate or to lessen an unpleasant incident. In fact, in a number of life fields, individuals experience excellent results or avoid terrible ones as a result of their practical attempts. â€Å"Effective proactive coping involves the mustering of time, money, planning and organizational skills, social support, and, to the extent possible, the management of the chronic burden so that when, inevitably, stressors are detected, one is prepared as much as possible to manage them† (Aspinwall & Taylor, pp. 421, 1997). Article 3: Beyond Self-Management: Antecedents and Consequences of Team Empowerment. The utilization of work groups carries on developing. It is a team of persons who work ‘interdependently’ to resolve issues or to do work. As both the utilization of work groups within business along with the level of study on groups has improved, researchers have concentrated more to worker empowerment. Research on empowered groups has fallen behind on self-managing groups, or groups whose associates organize them, allocate occupations, and plan. Self-managing groups have been linked with high efficiency, excellent customer service, security, professional contentment, and organizational assurance. A number of associates make use of the terms empowered groups and self-managing groups identically; however, others distinguish the perceptions (Kirkman & Rosen, pp. 63-64, 1999). Irrespective of the semantic uncertainty, there has been very small amount of practical work on groups strictly termed as empowered groups. Lately, a hypothetical model of empowered group has been developed that differentiates the concept from self-managing groups. The aim of this article was to test theory created by the model of group empowerment. â€Å"

Rewriting Essay Example | Topics and Well Written Essays - 500 words - 3

Rewriting - Essay Example Talbot gives an example of atashi and boku in the Japanese language. Women use the first one while men use the second one to mean the same thing â€Å"I.† Although the people who speak Japanese language can tell the difference, other people may claim that the two terms have different meanings. The same case applies to other societies such as the Carib Indians. According to Johnson and Tannen, behavioral differences across genders affect speech presentation. Men and women have different roles in the families and in the society too. Therefore, women have a tendency of talking about family and social issues as opposed to men, who tend to spend more time talking about politics and work related issues. These differences, according to Johnson and Tennen (p.53), come out as power differences. Men are considered superior to women since they are involved and often discuss more important issues concerning work and society. Women on the other hand, are considered less powerful since they discuss family and personal issues. Men take the center stage in the conversation. They seem to initiate and control the discourse of any conversation. Women will join in the conversation when they are allowed or when it is necessary to do so. These differences in conversations are seen as power differences. 2. Provide several examples of politically-correct (or bias-free) language as discussed by Kakutani and of doublespeak as discussed by Lutz. Discuss some of the motivations in each case for why such changes in language have been proposed/ used. What are some of the ways in which politically correct language and doublespeak are different and some of the ways in which they are similar? With the increasing need for observing gender and political sensitivity, choice of words becomes necessary. According to Kakutani, there exists politically correct language that is used to avoid political bias. Some of the most common bias words include master, fellow, king, lord among others (p. 517).

Islam and Religious Group Essay Example for Free

Islam and Religious Group Essay †¢Religious groups (based on http://religions. pewforum. org/pdf/affiliations-all-traditions. pdf) oChristianity †¢Evangelical Protestant †¢Mainline Protestant †¢Historically Black Churches †¢Roman Catholic †¢Latter-Day Saints (Mormons) †¢Jehovah’s Witnesses †¢Orthodox (Greek, Eastern) oJudaism (Orthodox, Conservative, or Reform) oBuddhism (Theravada or Mahayana) oIslam (Sunni, Shia, Sufism) oHinduism †¢Ethnic groups (based on divisions in U. S. Census Bureau documents) oAsian (Asian descent) oBlack (African descent). oHispanic and Latino (South or Central American descent) oPacific Islander (Polynesian descent) oWhite (European descent) Part III Answer the following questions in 150 to 250 words each about the religious group you selected: †¢How does your selected religious group differ from other religious groups (such as in their beliefs, worship practices, or values)? †¢What has been the experience of your selected religious group with others that do not share its beliefs or practices? †¢In what ways has the religious group you selected contributed to American culture? †¢Provide specific examples of prejudice or discrimination your selected religious group has experienced. †¢What were the sources of this prejudice or discrimination? †¢Does what you’ve learned about this religious group help you understand it? In what ways? Answer the following questions in 150 to 250 words each about the ethnic group you selected: †¢How does your selected ethnic group differ from other ethnic groups (such as differences in ancestry, language, or culture)? †¢What has been your selected ethnic group’s experience with other ethnic groups? †¢In what ways has the ethnic group you selected contributed to American culture? †¢Identify some specific examples of prejudice or discrimination that your selected ethnic group has experienced historically. †¢What were the sources of this prejudice or discrimination? †¢Does what you’ve learned about this ethnic group help you understand it? How? Part IV Answer the following questions in 150 to 250 words each: †¢How are the prejudice and discrimination experienced by your selected religious group and ethnic group similar? †¢How are they different? †¢Can you draw any conclusions about discrimination from this comparison.

Environmental Noise Management Plan

Environmental Noise Management Plan Environmental Noise Management Plan for a proposed Outdoor Music Event University of Derby Online Learning, University of Derby, UK Iwona Typek- Ryszka 100381110 This Noise Management Plan has been completed to regulate the potential noise issue during proposed three days outdoor music event. The objective of this plan is to provide control measures to prevent noise impact on the local residents during the event and to ensure that balance is achieved between providing good entertainment and controlling potential adverse effect of noise pollution. (Legislation.gov.uk, 1996) 2.1. Site details The outdoor music festival is intended to operate over a 3-day weekend period and it will be held at the Hainault Forest Country Park, Romford Rd, Chigwell, London IG7 4QL. Live music is proposed to be performed from the main stage and the secondary stage. There also will be two Dub music marquees. 2.2. Operational hours The following operational hours are understood to be representative for main and acoustic stages over the entire duration of the festival: Main and secondary stages will play live music on: Friday, Saturday and Sunday from 12:00 to 23:00. The two marquee tents will play dub music on: Friday and Saturday from 12.00hrs to 02.00hrs Sunday from 12.00hrs to 24.00hrs. 2.3. Additional venues Additional venues will be available for guests: Adjacent camping area capable of holding up to 200 tents Onsite bar and refreshments area Car park area capable of holding up to 500 cars 3.1. The maximum Music Noise Level for main and secondary stages with live music The usual noise level for outdoor festival has been described as energy averaging (LAeq,T) 98 decibels (dB) measured at the concert mixer position about 40m from the main loudspeaker and at a height of 10m to 15m in the audience area (Colthurst and Fisher, 2011). Organisers will set the maximum noise level to (LAeq,T) 95 decibels (dB) to allow margin for error. This must not be exceed over 15-minute period during the entire event (Sound Solution Consultants Ltd, 2010). Maximum Noise Level set in The Code of Practice are shown in table 3.1.1. This guidance is set for events which finish before 23:00h. For events carry on beyond 23:00h, guidance recommendation is that the music noise should not be audible within noise-sensitive premises with windows open in a typical manner for ventilation (Noise Council, 1995 p.7). Reggae festival will more likely fit into category other urban or rural venues so a 15 minute Leq of 65 dB(A) is the guideline limit. Concert Days/Calendar Year/Venue Venue Category Guideline 1 to 3 Urban Stadia or Arenas The MNL should not exceed 75 dB(A) over a 15 minute period 1 to 3 Other Urban and Rural Venues The MNL should not exceed 65 dB(A) over a 15 minute period 4 to 12 All Venues The MNL should not exceed the background noise level by more than 15 dB(A) over a 15 minute period *dB(A) the A-weighted sound pressure level weighted to reflect the way the human ear responds to different frequencies (Noise Council, 1995). Table 1. The maximum Music Noise Level (MNL) where the MNL is expressed as a Leq (Adapted from the Noise Council, 1995 p.6). 3.2. The maximum Music Noise Level for the noise sensitive areas The World Health Organisations (WHO) Guidelines for Community Noise document says that for outdoor living area noise levels of 55 dB LAeq cause serious annoyance during daytime and evening. The noise levels of 45dB LAeq (measured from outside) cause sleep disturbance to residence. The Guidelines recommends an internal LAeq of 30dB for optimal sleep conditions (and no more than 35dB for internal rooms during daytime). Organisers will set maximum noise level to 45dB LAeq (measured from outside) for operational hours of 12:00- 23:00 and 30dB LAeq (measured from outside) for event which carry on beyond 23:00. 4.1. Characteristic of reggae music The drums and bass guitar play significant role in reggae music and attention is drawn to low frequencies (En.wikipedia.org, 2017). This type of noise will travel substantially further, and it can easily pass through the barriers and structures. (Colthurst and Fisher, 2011). 4.2. Local Geography and Topography Hainault Forest Country Park is large park located in Greater London, which combines woodland and open space. This is a rural area and is relatively flat (Redbridge.gov.uk, 2017).The festival is planned on the open field which allows sound to travel without interference (Everest and Pohlmann, 2009). 4.3. Noise sensitive areas The closest noise sensitive receptors to the proposed festival site are summarised below: Receptor 1 Properties located at Lambourne End, approximately 1.33 km to the north of the proposed festival venue. Receptor 2 Properties located at Chingwell Row, approximately 1.45km to the west of the proposed festival venue. Receptor 3 Newly built housing development located behind a golf club, approximately 1.3 km to the south of the proposed festival venue. Receptor 4 Houses located alongside Romford Rd. approximately 1.3km to the south-west of the proposed festival venue. Picture 1. Location of noise sensitive areas 4.4. Noise Sources Main noise sources for the reggae festival have been identified as follow: Amplified music (recorded and live) Sound systems Sound checks Car parking and camping and bar area Departing patron noise The build and break down 4.5. Noise controls put before the event 4.5.1. Background Noise Survey The background noise, also known as ambient noise is defined as unwanted or harmful outdoor sound created by human activities, including noise emitted by means of transport road traffic, rail traffic, air traffic and from sites of industrial activity (The European Parliament and the Council of the European Union, 2002). There is no doubt that large music events may cause disturbance to local neighbourhood due to high powered amplification involved. Therefore there is a need to complete a background noise survey before the event, to predict noise emission levels, and to ensure the health and welfare of those who live nearby is maintained (Noise Council, 1995). Background noise survey will be undertaken end of April 2017 to determine background noise level at the mixer location and in the noise sensitive areas. Weather will be taken into account, as wind speed and direction or temperature may influence the transmission of sound. (Colthurst and Fisher, 2011). 4.5.2. Acoustic consultant Fully qualified and registered acoustic consultant will be employed by festival organisers to help with event planning, to complete noise survey and monitor noise levels throughout the event. (Code of Practice and Guidance Notes on Noise Control for Concerts and Outdoor Events, 2012, p.16) 4.5.3. Communication arrangements The communication network between the team members involved in noise monitoring will be established via handheld radios (Noise Council, 1995 p. 11). There will be hot line step up where local residents could use to complain about noise level. The hotline will be open for whole duration of the event. All complaints will be logged, investigated and remedial action will be taken. Log will be kept to demonstrate compliance (Code of Practice and Guidance Notes on Noise Control for Concerts and Outdoor Events, 2012, p.17) 4.5.4. Public relations 3 months before the event, first briefing note will be delivered to the noise sensitive premises, informing neighbours that the concerts will take place and advising them about the precautions taken to minimise noise impact. The second note will be delivered to the residents no later than 2 weeks before the event. This note will remind them about the festival, asking for their tolerance and providing a telephone number for the noise complaint hot-line where someone responsible can be contacted in case of any problems. (Noise From Open Air Events Guidance for Applicants, 2014, p. 10) 4.5.5. Sound preparation tests and set ups Sound propagation tests will be carried out at the day of the event to ensure that sound levels are correct and meet the targets. (Noise From Open Air Events Guidance for Applicants, 2014, p. 10) The weather condition on the days of the event also will be taken to consideration and level of noise will be correctly adjusted to meet specified criteria. To avoid unnecessary disturbances to the local residents, sound propagation tests will be carried out no earlier than at 10am. (Code of Practice and Guidance Notes on Noise Control for Concerts and Outdoor Events, 2012, p.12) 4.5.6. Sound system Circuit speakers system will be adopted for the main event stage. This system will help minimise noise level by positioning several low powered speakers around the audience. The system will be used instead of two large banks of speakers on either side of the stage. (Noise From Open Air Events Guidance for Applicants, 2014, p. 8) Loudspeakers will be positioned away from the noise sensitive areas properties in Chigwell Row and development near Romford Rd (Code of Practice and Guidance Notes on Noise Control for Concerts and Outdoor Events, 2012, p.13). Loudspeakers will be directed onto the area where audience will be, to avoid over-spill into the surrounding area (Soundadvice.info, 2017). The roof will be placed on the main and secondary stages to help to decrease the noise exposure outside the stage (Asselineaut et al., 2010). There will be no speakers positioned outside of two Dub Shacks and speakers located inside the tents will be positioned downwards, away from any doors. Several small speakers will installed to ensure an even distribution of sound (Sound Licensing Limited, 2015). Sound engineer will be strictly responsible for controlling the low frequency level of the music (bass) as its causes the most nuisance to local residents (Code of Practice and Guidance Notes on Noise Control for Concerts and Outdoor Events, 2012, p.12). 4.5.7. Rules for car park, comping area, bar and refreshment area The car park and the camping areas will be strictly monitored during and after licensable hours to avoid any unnecessary noise e.g. recorded and live music. Use of Portable PA systems and car stereos will be strictly prohibited in the car park and camping site. Patrons will be informed about this rule before entry to the site and on entrance to the site. This will be communicated via clear signage and through Terms and Conditions of use of both car park and camp site. If there will be a breach of this condition, the equipment will be confiscated and if there will be repeatable offence, the offenders will be removed from the site. The active patrols will be taking place during and after licensable hours and logbook will be kept to demonstrate compliance (One Love Management, 2015, p16, p.28). Bar and refreshment area will be monitored by Designated Premises supervisor. Bar will be closed at 22.30pm to ensure party will not carry on after licensable hours of event (One Love Management, 2015, p.12). 4.5.8. Traffic Management Road traffic noise is one of the main sources affecting sleep and causing annoyance (Ohrstrom et al., 2006). There is only one road leading from the festival venue to the main road. This road will serve as an access to the venue. To keep traffic to minimum organiser will encourage guests to use alternative methods of transports e.g. trains, buses or car share. There will be dedicated traffic management team in place to ensure that parking is done efficiently and without unnecessary disturbance to local residents (One Love Management, 2015, p.16). The unnecessary use of horns and use of heavy vehicles at night time will be also forbidden (WHO, 1999). 5.1. Monitoring noise level Monitoring of noise levels will be in place during licensable hours, and sound checks will be completed daily for the duration of the event. Those measurements will be completed at following locations: mixer position, stage, Dab Shacks and noise sensitive locations (Lets Rock London, 2015). Fixed sound level monitoring device will be used at the mixer position (Lets Rock London, 2015) and sound limiter device will be installed inside Dub Shacks to ensure that agreed limits are not exceeded (Sound Licensing Limited, 2015). The mobile sound level monitoring device will be used to measure sound level for each of new act performs on the stage. The remote sound level monitoring device will be set up at least one of the Noise Sensitive Locations and this device will be configured to record the sound levels for the duration of the event. There will be system put in place to alert the responsible person if any levels are exceeded. (Lets Rock London, 2015) 5.2. After the event All the results of the noise monitoring completed during the event will be kept and send to the Local Authority after the event, along with any complaints received, with documented corrective actions taken (Code of Practice and Guidance Notes on Noise Control for Concerts and Outdoor Events, 2012, p.17). The aim of the noise management plan is to address all noise related challenges and ensure that there is balance maintained between the needs of the event organisers and the local residents. The actions have been taken to reduce and manage the noise impact on the surrounding area and to ensure great entertainment for patrons. Asselineau, M., and Serra, M (2010) Music and outdoors: are they meant to work together?. Proceedings of 20th International Congress on Acoustics, ICA. Sydney; pp.1-7. Code of Practice and Guidance Notes on Noise Control for Concerts and Outdoor Events. (2012). Bath, p.12-17 Colthurst, A., and Fisher, S (2011) Noise and Vibration. Cited in: Battersby, S. Clays Handbook of Environmental Health. 20th Edition. Spon Press. London and New York. Ebook. En.wikipedia.org. (2017). Reggae. [online] Available at: https://en.wikipedia.org/wiki/Reggae [Accessed 12 Mar. 2017]. Everset, F. A., and Pohlmann, K. C (2009) Master Handbook of Acoustics. 5th Edition. Mc Grow Hill. London. Ebook. Legislation.gov.uk. (1996). Noise Act 1996. [online] Available at: http://www.legislation.gov.uk/ukpga/1996/37/crossheading/summary-procedure-for-dealing-with-noise-at-night [Accessed 12 Mar. 2017]. Lets Rock London. (2015). Lets Rock London 2016 Noise Management Plan. Noise from Open Air Events Guidance for Applicants. (2014). Portsmouth: Portsmouth City Council, p.8-10 Ohrstrom, E., Skanberd, A., Sevensson, H., and Gidlof-Gunnarsson, A (2006) Effect of road traffic noise and the benefit of access to quietness. Journal of Sound and Vibration 295(1/2); pp. 40-59. One Love Management, (2015). One Love Festival Appendix 2. EVENT SAFETY MANAGEMENT PLAN. Basingstoke: Basingstoke and Deane Borough Council, pp.12- 28. Redbridge.gov.uk. (2017). Redbridge Hainault Forest Country Park. [online] Available at: https://www.redbridge.gov.uk/leisure-sport-and-the-arts/parks/hainault-forest-country-park/ [Accessed 12 Mar. 2017]. Sound Solution Consultants Ltd, (2010). The Black Horse Festival Noise Impact Assessment TECHNICAL REPORT. Rother: Rother District Council. The European Parliament and the Council of the European Union (2002) Directive 2002/49/EC relating to the assessment and management of environmental noise. Official Journal of the European Communities. L 189; pp. 12-25. The Noise Council (1995) Code of Practice on Environmental Noise Control at Concerts, London, The Noise Council. World Health Organisation (1999) Guidelines for Community, Geneva. Sound Licensing Limited, (2015). NOISE IMPACT ASSESSMENT REPORT 3 CROYDON LANE SM7 3AS.